

QUADRO is a system of flat signs, industrially produced in a standard design.
It offers a complete selection, for both indoor and outdoor use, ranging from totems, to wall-mounted, projecting and hanging signs, each with a considerable variability of size.
The interchangeability of the extruded aluminium panels and the use of paper insert in standard DIN typeface format, assure complete flexibility and easy updating of information.
Notable its elegant perimeter frame that can be provided in different colours.
Download the catalogue
Types of signs
Totem for outdoor use
Posts-sign with frame
Posts-sign
Wall sign
Wall sign with paper inserts
Wall sign in ABS with paper inserts
Freestanding support
"Freestanding" base
Hanging sign
Desktop sign "Toblerone"
Desktop sign
Projecting sign
Totem for outdoor use
Monolith structure with robust extruded aluminium lateral profiles, depth of 150 mm with a “U” section, joined by means of extruded aluminium profiles.
The information panel is in aluminium sheet, 2 mm thick, press-folded on its four sides, and/or with extruded aluminium interchangeable panels as provided for by the system.
Installation with hot zinc plated steel plates secured to concrete foundation reinforced to requirement.
Posts-sign with frame
Sign 20 mm thick with a perimeter frame in extruded aluminium joined together by Zamak die casting corners.
The information panel is made up of extruded aluminium strips, available in heights of 24, 36, 48, 72, 96 and 144 mm, or in aluminium sheet of 1.2 mm width if the sign is higher than 144 mm.
The strips and sheets are clipped to an invisible extruded aluminium structural plate, using a nylon clip with modular coupling that guarantees a perfect distance between the modules.
Extruded aluminium posts, single groove guide, Ø 70 mm, with 16-side polygonal section.
Posts-sign
Sign 16 mm thick, available in heights of 100, 150, 200, 250 and 300 mm.
Extruded aluminium posts, single groove guide, Ø 70 mm, with 16-side polygonal section; double groove guide model is 55x80 mm in size.
Installation with hot zinc plated steel plates secured to concrete foundation reinforced to requirement.
Wall sign
Sign 15 mm thick with a perimeter frame in extruded aluminium joined together by Zamak die casting corners.
The information panel is made up of extruded aluminium strips, available in heights of 24, 36, 48, 72, 96 and 144 mm, or in aluminium sheet of 1.2 mm width if the sign is higher than 144 mm.
The strips and sheets are clipped to an invisible extruded aluminium structural plate, using a nylon clip with modular coupling that guarantees a perfect distance between the modules.
Installed with concealed screw anchors and bolts.
Wall sign with paper inserts
DIN A2 594x420 mm
DIN A3 420x297 mm
DIN A4 210x297 mm
Signs 15 mm thick with a perimeter frame in extruded aluminium joined together by Zamak die casting corners.
Transparent polycarbonate protective cover, 2mm thick, with magnetic perimeter edge.
Installed with concealed screw anchors and bolts.
Wall sign in ABS with paper inserts
150x150 mm
Sign 15 mm thick, injection moulded, ABS, UV resistant material, with a perimeter frame that click fastens on the base plate.
Transparent polycarbonate protective cover 2mm thick.
Installed with concealed screw anchors and bolts.
Freestanding support
Realised with one or two posts with an oval tube in steel of 40x20mm, with variable heights, connected to the circular base in steel sheet.
The model with one post is recommended for signs no larger than 450 mm.
"Freestanding" base
A light and secure system, used to stabilise panels no more than 1900 mm high and 5 to 25 mm thick.
The two “wings” in silver anodised extruded aluminium that make up the base, can be opened and closed, retaining the panels in the correct vertical position.
Lateral closures with black injection moulded ABS plastic plugs.
Hanging sign
Sign 20 mm thick with a perimeter frame in extruded aluminium joined together by Zamak die casting corners.
The information panel is made up of extruded aluminium strips, available in heights of 24, 36, 48, 72, 96 and 144 mm.
The strips are clipped to an invisible extruded aluminium structural plate, using a nylon clip with modular coupling that guarantees a perfect distance between the modules.
Installed with steel thread and automatic chrome plated clamp to be fixed to the ceiling.
Desktop sign "Toblerone"
Realised with an extruded aluminium profile in triangular sections, in which the extruded aluminium panel, 36 mm high, is slid into place.
Closure with injection moulded nylon plugs
Desktop sign
Sign 15 mm thick with perimeter frame, fixed on triangular aluminium support.
The information panel is made up of extruded aluminium strips, available in heights of 24, 36, 48, 72, 96 and 144 mm or with paper inserts in a 150x150 mm format.
Projecting sign
Sign 20 mm thick with a perimeter frame in extruded aluminium joined together by Zamak die casting corners.
The information panel is made up of extruded aluminium strips, available in heights of 24, 36, 48, 72, 96 and 144 mm.
The strips are clipped to an invisible extruded aluminium structural plate, using a nylon clip with modular coupling that guarantees a perfect distance between the modules.
The installation has an extruded aluminium profile, fixed to the wall with concealed screw anchors and bolts.
Technical characteristics
 |
MODULE TYPES
The sizes of the signs increase in multiples of 12 mm. The extruded aluminium panels are available in heights of 24, 36, 48, 72, 96 and 144 mm.
|
 |
ANTI-TAMPERING
The system is designed to guarantee the user against any possible tampering that is not controlled or authorised, obviously excluding acts of vandalism or similar acts. The extruded aluminium panels are inserted by clipping them into the perimeter frame of the sign and so removal is only possible with the specific tool provided.
|
 |
MATERIALS
Extruded profiles: EN AW 6060 aluminium alloy
Sheets: EN AW 3105 aluminium, 1.2 mm thick
Fastening clip: PA66 - Polyamide (Nylon) 66
Transparent paper inserts protective cover: Polycarbonate 2 mm thick
|
 |
GRAPHICS
Realised in adhesive vinyl film with high adhesion and dimensional stability, by digital print with UV filter lamination, on 120 grams paper in the paper insert signs.
|
 |
ANODISING AND PAINTING
The anodising process is carried out both in natural chemical silver and in black electro colour in conformity with the “QUALANOD” European quality mark. Painting is carried out in full respect of technical directives of the “QUALICOAT” European quality mark, using solvent free, thermo-indurent enamel with a base of polyester resin and selected non-toxic pigments completely free of lead, chrome and zinc. The surface has a non-reflexive finishing with a gloss level ranging from 30 to 50 units.
|
 |
FIRE SAFETY CERTIFICATION
Materials are certified Class 1 in fire safety.
|
 |
MAINTENANCE AND CLEANING
The products do not need any particular maintenance. Use only water and neutral soap to clean the surface. Use of a soft cloth and rinsing and drying well is advised. Small marks on the aluminium surface can be cleaned with white spirit or denatured alcohol, while marks caused by the absorption of substances on the paint cannot be removed. Avoid using products that contain abrasive substances or solvents.
|
Gallery